Description

(Click to enlarge in new window)
LED signals are more efficient and draw much less power than bulbs - these are some of their main advantages. However, virtually all motorcycle flashers are mechanical flashers, designed for bulbs. Using LED signals with a mechnical flasher causes "fast flash", or even failure to flash at all. In most cases, it is much better to upgrade to an electronic flasher to allow your LED signals to blink at a DOT-legal flash rate.

Installation is easy! Our ELF2 flasher comes with the same connector as most OEM motorcycles, so installation is a snap - just plug it in and go!

On Sale! $17.99

Scroll down to purchase

 

Fitments

ELF2 is plug-in compatible with the following motorcycles

YAMAHA
YZF-R1 (all years), YZF-R6 (all years), YZF-600R (all years), FZ-1 (all years), FZ-6 (all years), 09+ V-Max, FJR1300
..and most others

HONDA
RC-51 (all years), CBR-900RR, CBR-929RR, CBR-954RR, CBR-1000RR (all years), CBR-1100XX, 07+ CBR-600RR, CBR-600F2/F3/F4/F4i, VTX (1800C, 1800R, 1800S, 1300C, 1300S, 1300R), ST1300, GL1500
...and most others

KAWASAKI
ZX-6R/RR, 636, Z-1000, ZZR-1200, ZX-12, ZX-10R
...and most others


OTHERS
The ELF2 Electronic Flasher can still be used with most motorcycles not listed above - it simply needs to be manually wired. Many motorcycle flashers have flat prongs coming from the bottom. In this case, cut the connector from the ELF2, and replace with spade terminals (like Radio Shark part #64-3132 or similar), then simply slide the terminals into your factory connector. Make sure so connect the RED wire on the ELF2 to the switched 12V wire on your bike, and the BLUE wire on the ELF2 to the output/blink wire on your bike.

If your bike does not use a flasher with spade terminals, the ELF2 can be hard-wired, provided the wires on the ELF2 are connected to the correct vehicle wires as described above.

 

Specifications

  • Switching capacity: 0.05A to 10A (6W to 120W)
  • Flashing speed: DOT standard (~1Hz, ~50% duty)
  • Dimnensions: 1.5" x 1.25" x 0.75"
  • Wire Length: 6"
  • Weight: 25 grams
  • Input voltage: 9-20VDC
  • Other: Potted epoxy, 100% waterproof

     

    Features

  • Small and lightweight, comparable in size to OEM flasher - easy to install
  • Operates bulb and LED signals in any combination, provided draw is between 0.05A and 10A
  • Fully protected against reverse hookup, overvoltage, water and dust and vibration
  • Easy plug-in installation, no wiring necessary on most vehicles
  • Replaces all 2-pin and most 3-pin flashers
  • 2-year warranty!
  • Solves "fast flash" and no-blink issues with LED signals and integrated tail lights

     

    Pictures

    ELF2 Flasher Relay
    (click picture to view full size)
     
     

     

    Testimonials

    "Thanks for sending my order so quickly! I love the flushmounts and the flasher got everything working perfectly. Just plugged it in and it just worked. Awesome!"

    -Brian Welch from Long Beach, CA (2009 Yamaha R1)
    "Hi guys, I got the flasher - plugged it in and everything is back to stock, well for the flashing speed anyway. But now I am running LED's all around and they are working great. Thank you for a simple and easy to use product."

    -Dave Caddy, Atlanta GA (CBR-929RR)
    "Hey i just wanted to write and thank you for turning me on to this flasher. I installed it at the same time as the flushmounts and the X-arc lights. The flasher was simple to plug in, and silent too"

    -Vinh Tran, Manchester, NH (custom chopper)
    "Hello my name is Victor Dimov, I bought your flasher through the website to match my other LED's. I wanted to report back that I got the package and the flasher was easy to put and everything works as expected. Thank you for helping my bike and wish you good riding!"

    -Victor Dimov, Moscow Russia (Kawasaki ZX12)
    "To whom it may concern: I am reporting back to you as promised to say I received the flasher and managed to install it this weekend. It was easy and the hardest part was getting the old flasher off, it is a bit of a pain for an old guy! I am satisfied - it works great, the only thing I would say is that I didn't know it would be so quiet. Don't get me wrong, it's good - I just didnt expect it and when it wasn't clicking I thought it wasn't working, but it blinks fine."

    -Kevin Eager, Chatsworth CA (Honda Goldwing)

     

    Kit Includes

  • Flasher relay with wire and connector attached
  • Simple instructions

     

    Buy the ELF2 Flasher!

    Buy now from HighTechSpeed.Com
    FITS MOST MOTORCYCLES
    ELF2 Electronic Flasher Relay
    Price $17.99
    Usually ships in 1 day